Kanal Rechner Elite1.5.1
Herausgeberbeschreibung
Duct Calculator Elite™ ersetzt Ihre Ductulator-Scheibe durch schnelle, präzise Kanaldimensionierung auf Basis der Reibungsverlust-Gleichungen des ASHRAE Handbook — Fundamentals. Seit 2013 im Einsatz bei HLK-Profis, Maschinenbauingenieuren und Fachbetrieben. Ein Preis — keine Abos, keine Werbung, keine Konten.
DREI RECHNER, NUR EINEN TIPP ENTFERNT
• KANALGRÖSSE NACH LUFTSTROM — Geben Sie den Luftdurchsatz sowie Geschwindigkeit oder Reibung vor und berechnen Sie runde und rechteckige Kanalabmessungen. Legen Sie das Seitenverhältnis des Rechteckkanals passend zum verfügbaren Platz fest. Die nächstliegenden Standardgrößen für rund und rechteckig werden mit ihrer tatsächlichen Reibung angezeigt.
• KANALGRÖSSE NACH ABMESSUNG — Geben Sie einen runden Durchmesser oder Höhe und Breite eines Rechteckkanals ein, sperren Sie Luftdurchsatz, Geschwindigkeit oder Reibung und berechnen Sie die übrigen Variablen.
• DRUCKABFALL — Rechnen Sie zwischen Kanallänge, Druckabfall und Reibung um. Ermitteln Sie den exakten Druckabfall einer Installation oder die maximale Kanallänge, die Ihren Auslegungs-Druckabfall einhält.
AUSLEGUNGSTOOLS
• REIBUNGSRATE — Geben Sie verfügbare Pressung und Kanallänge ein, fügen Sie Formstücke aus einer integrierten Liste typischer äquivalenter Längen hinzu (Bögen, T-Stücke, Y-Abzweige, Luftauslässe) und erhalten Sie die gesamte äquivalente Länge und Ihre Ziel-Reibungsrate — der Auslegungsworkflow im Stil von Manual D für Wohngebäude. Übergeben Sie das Ergebnis anschließend mit einem Tipp direkt an Kanalgröße nach Luftstrom.
• LUFTMENGE AUS WÄRMELAST — Geben Sie sensible Wärmelast und Temperaturdifferenz ein und erhalten Sie den erforderlichen Luftdurchsatz, korrigiert um die Luftdichte.
MATHEMATIK AUF INGENIEURSNIVEAU
Löst die Colebrook-Gleichung für den Reibungsbeiwert direkt für die Oberflächenrauheit jedes Kanalmaterials — dieselbe Methode wie beim ASHRAE-Reibungsdiagramm — statt aus Tabellen zu interpolieren. Die Rauheitswerte stammen aus Tabelle 1 des ASHRAE Handbook — Fundamentals 2025, und die App zeigt Ihnen den verwendeten Wert. Rechteckige Ergebnisse nutzen die Huebscher-Gleichung für den äquivalenten Durchmesser; die Luftdichte wird für Ihre Temperatur und Höhe korrigiert, die Viskosität für Ihre Temperatur, sodass die Ergebnisse auch in der Höhe und außerhalb der Raumtemperatur tragen. Unterhalb des turbulenten Bereichs, in dem die veröffentlichten Methoden übereinstimmen, wird das Ergebnis als Näherung gekennzeichnet.
PRÄZISE EINGABE, GEMACHT FÜRS FELD
Tippen Sie exakte Werte direkt an Ort und Stelle ein — keine umständlichen Schieberegler, keine Pop-up-Eingabemasken. Bestätigen Sie mit einem Tipp, und jeder abhängige Wert wird sofort neu berechnet. Ein klares Layout hält alle Ergebnisse beim Arbeiten im Blick — und alles funktioniert komplett offline.
KONFIGURIERT FÜR REALE BAUSTELLENBEDINGUNGEN
• Kanalabmessungen: Zoll, Zentimeter oder Millimeter
• Luftdurchsatz: CFM, Kubikfuß pro Sekunde, Kubikmeter pro Sekunde, Kubikmeter pro Stunde oder Liter pro Sekunde
• Geschwindigkeit: Fuß pro Sekunde, Fuß pro Minute oder Meter pro Sekunde
• Druckverlust: Zoll Wassersäule pro 100 ft oder Pascal pro Meter
• Kanalmaterialien: verzinkter Stahl, Spiralfalzrohr (Stahl), verzinkte Spirale (gewellt), Aluminium, unbeschichteter Stahl, PVC-Rohr, Beton, Phenolharz-Kanal (vorisoliert), flexibler Metallkanal, flexibler Schlauch mit Spiralkern (isoliert), sprühbeschichtete Fiberglas-Auskleidung und kaschierte (glatte) Fiberglas-Auskleidung
• Korrekturen für Lufttemperatur (°F, °C, K) und Höhe (Fuß oder Meter)
Wenn Sie das nächste Mal ins Meeting oder auf die Baustelle fahren, lassen Sie den Ductulator zu Hause — alles, was Sie brauchen, ist auf Ihrem iPhone oder iPad.
Fragen oder Ideen für die nächste Version? Schreiben Sie an techsupport@cyberprodigy.com — wir lesen jede Nachricht.
Über Kanal Rechner Elite
Das Unternehmen, das Kanal Rechner Elite entwickelt, ist Cyberprodigy LLC. Die neueste vom Entwickler veröffentlichte Version ist 1.5.1.
Um Kanal Rechner Elite auf Ihrem iOS-Gerät zu installieren, klicken Sie einfach auf die grüne Schaltfläche Weiter zur App oben, um den Installationsvorgang zu starten. Die App ist seit 2026-09-02 auf unserer Website gelistet und wurde 26 Mal heruntergeladen. Wir haben bereits geprüft, ob der Download-Link sicher ist; zu Ihrem eigenen Schutz empfehlen wir jedoch, die heruntergeladene App mit Ihrem Antivirusprogramm zu scannen. Ihr Antivirusprogramm kann Kanal Rechner Elite als Malware erkennen, wenn der Download-Link defekt ist.
So installieren Sie Kanal Rechner Elite auf Ihrem iOS-Gerät:
- Klicken Sie auf unserer Website auf die Schaltfläche Weiter zur App. Dadurch werden Sie zum App Store weitergeleitet.
- Sobald Kanal Rechner Elite im iTunes-Eintrag Ihres iOS-Geräts angezeigt wird, können Sie den Download und die Installation starten. Tippen Sie rechts neben der App auf die Schaltfläche LADEN, um den Download zu starten.
- Wenn Sie nicht in der iOS App Store App angemeldet sind, werden Sie nach Ihrer Apple-ID und/oder Ihrem Passwort gefragt.
- Nachdem Kanal Rechner Elite heruntergeladen wurde, sehen Sie rechts einen INSTALLIEREN-Button. Tippen Sie darauf, um die eigentliche Installation der iOS-App zu starten.
- Sobald die Installation abgeschlossen ist, können Sie auf die Schaltfläche ÖFFNEN tippen, um sie zu starten. Das Symbol wird außerdem zum Startbildschirm Ihres Geräts hinzugefügt.
Programmdetails
Systemanforderungen
Download-Informationen
Preisgestaltung
Versionsgeschichte
Version 1.5.1
veröffentlicht am 2026-09-02
Drei weitere Kanalmaterialien in der Liste, dazu Luftdurchsatz in m³/h und der ASHRAE-Rauheitswert jedes Materials. Die Korrektur nach Lufttemperatur und Höhe erfasst neben der Dichte auch die Viskosität.
NEU
• Drei weitere Kanalmaterialien: Phenolharz (vorisoliert), verzinkte Spirale (gewellt) und flexibler Schlauch mit isoliertem Spiralkern. Die beiden Fiberglas-Auskleidungen tragen jetzt die ASHRAE-Bezeichnungen.
• Luftdurchsatz in Kubikmetern pro Stunde (m³/h).
• Die Einstellungen zeigen die absolute Rauheit, die für jedes Material verwendet wird — aus Tabelle 1 des ASHRAE Handbook — Fundamentals 2025. Tippen Sie auf ⓘ, wo die ASHRAE einen Bereich statt eines einzelnen Werts angibt.
• Ein Hinweis am Ergebnis, wenn die Strömung den turbulenten Bereich verlässt und die veröffentlichten Reibungsmethoden nicht mehr übereinstimmen.
NICHT STANDARDMÄSSIGE LUFT
Die Auslegung hat Ihre Lufttemperatur und Höhe schon immer berücksichtigt; in dieser Version ändert sich auch die Luftviskosität mit Ihrer Temperatur — so, wie es das ASHRAE Handbook für Luft außerhalb des Diagrammbereichs vorschreibt. Nahe Meereshöhe und bei üblichen Temperaturen ändert sich nichts; höher oder heißer fallen die Raten 3–13 % höher aus als in früheren Versionen; das obere Ende nur dort, wo extreme Hitze und Höhe zusammenkommen. Ihre gespeicherte Lufttemperatur und Höhe bleiben unverändert; Neuinstallationen starten jetzt mit einer Lufttemperatur von 70 °F und einer Höhe auf Meereshöhe.
BEHOBEN
• Ein Einheitenwechsel prüft den umgerechneten Wert jetzt erneut gegen den Bereich der neuen Einheit.
• Druckabfall nimmt metrische Kanallängen bis 150 m an.
Version 1.5.1
veröffentlicht am 2026-10-14
Version History Added three more duct materials to the list, plus airflow in m³/h and the ASHRAE roughness value behind every material. The air temperature and elevation adjustment covers viscosity as well as density.
NEW
• Three more duct materials: phenolic (pre-insulated), galvanized spiral (corrugated), and flexible duct with an insulated helix core. The two fibrous glass liners now use ASHRAE's names.
• Airflow in cubic meters per hour (m³/h).
• Preferences shows the absolute roughness used for every material, from Table 1 of the 2025 ASHRAE Handbook — Fundamentals. Tap ⓘ where ASHRAE gives a range rather than a single number.
• A flag on results where flow leaves the turbulent range and the published friction methods stop agreeing.
NON-STANDARD AIR
Sizing has always adjusted for your air temperature and elevation; this version lets air viscosity vary with your temperature too, as the ASHRAE Handbook prescribes for air outside the chart's range. Near sea level at ordinary temperatures nothing changes; higher or hotter, rates read 3–13% higher than in previous versions, the top of that range only where extreme heat and altitude combine. Your saved air temperature and elevation carry over unchanged; new installs now default the air temperature to 70 °F and the elevation to sea level.
FIXED
• A unit switch now re-checks the converted value against the new unit's range.
• Pressure Drop accepts metric duct length up to 150 m. 1.5.1 Sep 2 • NEW Design tab: calculate your target friction rate from available static pressure, duct length, and fittings (Manual D style), then send it straight into Duct Size by Airflow
• NEW Airflow from Heat Load: enter a sensible load and temperature difference to get density-corrected airflow
• Redesigned interface with a cleaner, card-based layout
• New inline value entry — edit any field in place and confirm with a tap
• Lock friction in Duct Size by Dimension and solve for airflow and velocity
• Localization improvements across all supported languages, plus compatibility updates for the latest iOS 1.5.0 Jul 12 -Overall performance and compatibility improvements for the latest iOS platforms. 1.4.1 10/01/2024 -Overall performance and compatibility improvements for the latest iOS platforms.
-Added ability to lock friction on "Duct Size by Dimension" calculator and solve for airflow and velocity. 1.4.0 10/17/2022 -Performance and compatibility improvements for latest iOS platforms and devices.
-Resolved bug from user feedback. 1.3.3 01/11/2021 -Overall performance and compatibility improvements for latest iOS platforms. 1.3.2 06/29/2020 -Overall performance and compatibility improvements for latest iOS platforms. 1.3.1 05/19/2019 -Overall performance and compatibility improvements for latest iOS platforms. 1.3 06/01/2017 -Added support for iOS 8
-New calculator for duct length/pressure drop conversion 1.2 12/29/2014 -Added support for iOS 7 1.1.1 09/27/2013 -Added language support for German, Spanish, French, Japanese, Korean, Portuguese, and Simplified Chinese
-Added landscape view on iPad 1.1 07/10/2013 1.0 07/01/2013
Version 1.5.1
veröffentlicht am 2026-09-04
Version History Added three more duct materials to the list, plus airflow in m³/h and the ASHRAE roughness value behind every material. The air temperature and elevation adjustment covers viscosity as well as density.
NEW
• Three more duct materials: phenolic (pre-insulated), galvanized spiral (corrugated), and flexible duct with an insulated helix core. The two fibrous glass liners now use ASHRAE's names.
• Airflow in cubic meters per hour (m³/h).
• Preferences shows the absolute roughness used for every material, from Table 1 of the 2025 ASHRAE Handbook — Fundamentals. Tap ⓘ where ASHRAE gives a range rather than a single number.
• A flag on results where flow leaves the turbulent range and the published friction methods stop agreeing.
NON-STANDARD AIR
Sizing has always adjusted for your air temperature and elevation; this version lets air viscosity vary with your temperature too, as the ASHRAE Handbook prescribes for air outside the chart's range. Near sea level at ordinary temperatures nothing changes; higher or hotter, rates read 3–13% higher than in previous versions, the top of that range only where extreme heat and altitude combine. Your saved air temperature and elevation carry over unchanged; new installs now default the air temperature to 70 °F and the elevation to sea level.
FIXED
• A unit switch now re-checks the converted value against the new unit's range.
• Pressure Drop accepts metric duct length up to 150 m. 1.5.1 2d ago • NEW Design tab: calculate your target friction rate from available static pressure, duct length, and fittings (Manual D style), then send it straight into Duct Size by Airflow
• NEW Airflow from Heat Load: enter a sensible load and temperature difference to get density-corrected airflow
• Redesigned interface with a cleaner, card-based layout
• New inline value entry — edit any field in place and confirm with a tap
• Lock friction in Duct Size by Dimension and solve for airflow and velocity
• Localization improvements across all supported languages, plus compatibility updates for the latest iOS 1.5.0 Jul 12 -Overall performance and compatibility improvements for the latest iOS platforms. 1.4.1 10/01/2024 -Overall performance and compatibility improvements for the latest iOS platforms.
-Added ability to lock friction on "Duct Size by Dimension" calculator and solve for airflow and velocity. 1.4.0 10/17/2022 -Performance and compatibility improvements for latest iOS platforms and devices.
-Resolved bug from user feedback. 1.3.3 01/11/2021 -Overall performance and compatibility improvements for latest iOS platforms. 1.3.2 06/29/2020 -Overall performance and compatibility improvements for latest iOS platforms. 1.3.1 05/19/2019 -Overall performance and compatibility improvements for latest iOS platforms. 1.3 06/01/2017 -Added support for iOS 8
-New calculator for duct length/pressure drop conversion 1.2 12/29/2014 -Added support for iOS 7 1.1.1 09/27/2013 -Added language support for German, Spanish, French, Japanese, Korean, Portuguese, and Simplified Chinese
-Added landscape view on iPad 1.1 07/10/2013 1.0 07/01/2013
Version 1.5.0
veröffentlicht am 2026-08-24
Version History • NEW Design tab: calculate your target friction rate from available static pressure, duct length, and fittings (Manual D style), then send it straight into Duct Size by Airflow
• NEW Airflow from Heat Load: enter a sensible load and temperature difference to get density-corrected airflow
• Redesigned interface with a cleaner, card-based layout
• New inline value entry — edit any field in place and confirm with a tap
• Lock friction in Duct Size by Dimension and solve for airflow and velocity
• Localization improvements across all supported languages, plus compatibility updates for the latest iOS 1.5.0 Jul 12 -Overall performance and compatibility improvements for the latest iOS platforms. 1.4.1 10/01/2024 -Overall performance and compatibility improvements for the latest iOS platforms.
-Added ability to lock friction on "Duct Size by Dimension" calculator and solve for airflow and velocity. 1.4.0 10/17/2022 -Performance and compatibility improvements for latest iOS platforms and devices.
-Resolved bug from user feedback. 1.3.3 01/11/2021 -Overall performance and compatibility improvements for latest iOS platforms. 1.3.2 06/29/2020 -Overall performance and compatibility improvements for latest iOS platforms. 1.3.1 05/19/2019 -Overall performance and compatibility improvements for latest iOS platforms. 1.3 06/01/2017 -Added support for iOS 8
-New calculator for duct length/pressure drop conversion 1.2 12/29/2014 -Added support for iOS 7 1.1.1 09/27/2013 -Added language support for German, Spanish, French, Japanese, Korean, Portuguese, and Simplified Chinese
-Added landscape view on iPad 1.1 07/10/2013 1.0 07/01/2013
Version 1.4.1
veröffentlicht am 2026-07-01
Version History -Overall performance and compatibility improvements for the latest iOS platforms. 1.4.1 10/01/2024 -Overall performance and compatibility improvements for the latest iOS platforms.
-Added ability to lock friction on "Duct Size by Dimension" calculator and solve for airflow and velocity. 1.4.0 10/17/2022 -Performance and compatibility improvements for latest iOS platforms and devices.
-Resolved bug from user feedback. 1.3.3 01/11/2021 -Overall performance and compatibility improvements for latest iOS platforms. 1.3.2 06/29/2020 -Overall performance and compatibility improvements for latest iOS platforms. 1.3.1 05/19/2019 -Overall performance and compatibility improvements for latest iOS platforms. 1.3 06/01/2017 -Added support for iOS 8
-New calculator for duct length/pressure drop conversion 1.2 12/29/2014 -Added support for iOS 7 1.1.1 09/27/2013 -Added language support for German, Spanish, French, Japanese, Korean, Portuguese, and Simplified Chinese
-Added landscape view on iPad 1.1 07/10/2013 1.0 07/01/2013
Version 1.4.1
veröffentlicht am 2024-10-01
Oct 1, 2024
Version 1.4.1
-Overall performance and compatibility improvements for the latest iOS platforms.
Version 1.4.1
veröffentlicht am 2024-10-01
-Overall performance and compatibility improvements for the latest iOS platforms.
Version 1.4.0
veröffentlicht am 2022-10-17
Oct 17, 2022
Version 1.4.0
-Overall performance and compatibility improvements for the latest iOS platforms.
-Added ability to lock friction on "Duct Size by Dimension" calculator and solve for airflow and velocity.
Version 1.3.3
veröffentlicht am 2021-01-11
Jan 11, 2021 Version 1.3.3
-Performance and compatibility improvements for latest iOS platforms and devices.
-Resolved bug from user feedback.
Version 1.3.2
veröffentlicht am 2020-06-29
Jun 29, 2020 Version 1.3.2
-Overall performance and compatibility improvements for latest iOS platforms.



